Selection guide for vibration isolators: How to balance performance and cost for solid rubber POT-P series
1、 Vertical and Horizontal Vibration Isolation: Dual Dimensional Performance Analysis of Vibration isolators
The core indicator of an isolator is the ratio of natural frequency to damping. The POT-P series of solid rubber vibration isolators has a vertical natural frequency of 6.5-12Hz and a horizontal natural frequency of 3-8Hz, which can effectively isolate mid to high frequency vibrations above 20Hz (such as environmental noise and equipment vibration). The design with a damping ratio of 0.05-0.2 avoids the risk of low-frequency resonance.
LeadTop ensures through simulation analysis and experimental verification that the POT-P series vibration isolators can suppress vibration transmission and maintain dynamic response speed in scenarios such as microscopes and medical biology, demonstrating the critical value of vibration isolators in precision equipment protection.
2、 Structural stability and installation convenience: key to improving laboratory efficiency of vibration vibration isolators
The POT-P series isolator adopts an integrated metal frame and rubber vulcanization process, with high structural rigidity and low deformation after long-term use. Its lifting and adjusting seat supports quick leveling, and with optional casters, it can achieve free switching between “fixed mobile” modes of the device.
After adopting LeadTop’s POT-P isolator in a certain university’s biology laboratory, the leveling time of the microscope platform was shortened from 30 minutes to 5 minutes, and there was no need for frequent calibration, significantly improving experimental efficiency and proving the important role of vibration isolators in optimizing experimental processes.
3、 Balancing Cost and Performance: Rational Selection of Vibration vibration isolators in Medium and Low Frequency Scenarios
Compared to air springs or active isolation systems, the POT-P series vibration isolators achieve mid to high frequency isolation requirements at a lower cost. Its load range is 180-800kg/piece, covering most light equipment; The characteristic of recovery time<5s ensures that the device quickly stabilizes after a brief impact.
LeadTop allows users to choose between basic or upgraded models (such as adding limit devices) based on their scenarios through modular design, further optimizing cost-effectiveness and making the POT-P series vibration isolators a practical isolator solution for medical, industrial testing, and other fields.