Rubber isolation pads selection guide: precise matching strategy from parameters to scenarios
When selecting rubber isolation pads, it is necessary to comprehensively consider the three core parameters of vibration frequency, load weight, and environmental conditions. Taking LeadTop’s anti creep solid rubber isolation pads POT-X series as an example, its wide frequency coverage capability of vertical natural frequency 6.5-16Hz and horizontal 2-8Hz can meet diverse needs from low-frequency heavy equipment to high-frequency precision instruments.
By combining single or multiple layers, users can flexibly adjust the vibration isolation stiffness, achieving the cost-effectiveness advantage of “one pad for multiple uses”.
Material innovation of rubber isolation pads
Traditional rubber pads are prone to creep due to long-term compression, leading to a decrease in vibration isolation performance. The POT-X series forms a three-dimensional cross-linked structure by adding polyester fibers and graphite, significantly enhancing the material’s resistance to deformation.
LeadTop laboratory tests have shown that the one-year creep rate of this series is only 21.5%, and the 10-year extrapolation value is 35.6%, which is much lower than the creep rate of ordinary rubber, which is over 50%. Meanwhile, the thermal conductivity of graphite can accelerate heat dissipation and extend the service life of the pad in high-temperature environments.
Scenario based application of rubber vibration isolation pads
In the industrial field, the POT-X series has been successfully applied to vibration isolation of heavy-duty equipment such as stamping machines and compressors, reducing horizontal displacement by more than 60%; In civil buildings, the multi-layered combination scheme can effectively isolate the impact of subway vibration on precision laboratories.
LeadTop is a customized solution for a semiconductor factory. By mixing mesh and solid structures, the vibration amplitude of the equipment is reduced from 0.5mm to 0.08mm, ensuring the stable operation of the production line.
The selection of rubber isolation pads should be based on performance parameters and optimized according to scene requirements. LeadTop’s POT-X series has become a benchmark product in both industrial and civilian fields due to its creep resistance, wideband vibration isolation, and scene based design, providing comprehensive support from theory to practice for the stable operation of equipment.